NEW!! CLAUSSEN EMBOSSING PRINTER

BENEFITS / OPTIONS:

• Embosses wood with any information needed with 1/8” approx. depth.
• Embossing hub transfers ink into the letters on the painted surface. Ink helps embossment
stand out for easy identification even if the surface is already painted.

• One embossing hub is motor driven to insure that the hub is timed with the table.
• Prints on various widths of boards and is designed to glide easily to accommodate any board width run.
• Embosses one or both sides of the lumber.
• Manual or automatic hub positioning

AIR ACTUATED STUD PRINTER #777

• Can be mounted to print top, bottom, or sides of your product.
• Board driven printer for stud mill applications.
• Air actuated via foot pedal or push button.
• Built with Claussen quality and durability.
• Standard size hubs 1-1/2", 3" & 6", other sizes upon request 

DUAL EDGE PRINTER

• Designed to print on both edges of laminated beams.
• Capable of printing company name, logo and variable info.
• Capable of printing on any size beams

LAMINATED BEAM PRINTER

• For printing logo's and information on center flange of I-Joist every 4 to 8 feet, depending upon application.
• Varied sizes of Grade Hub available from 24" to 36" in diameters and width from 1-1/2" to 12".
• Frame and drive systems available that allow height adjustment for printing on various thickness of product.
• Linear movement of printing hubs for adjustment of printing location.
• Several designs for various applications available.
• Heavy duty, Claussen built.

LAMINATED BEAM FACE GRADE PRINTER & LUMBER TREATMENT PRINTER

• Capable of printing 6" by 35" stamp for grading and/or stamping company logo on beam face.
• Heated ink roll kits, ink rolls and inks available.
• Velco backed, standard 12" drum. Other sizes available upon request.
• Optional wet ink system available.

STRIPE MARKERS #444

• Stripe Markers are used to place a continuous or an intermittent stripe on lumber, plywood, and panels.
• Patented ink roll heater kits available for these units.
• Unit is free spinning and board driven.
• Can be mounted to stripe the end or the top of the product. (horizontally or vertically)
• Can be used as I.D. marker for end edging signaled by an optimizer.
• Can be modified to apply grade stamps in smaller mills.
• Velcro backed grade hubs and steel dies, various sizes available.
• 2 standard designs.
• Custom applications welcome, please call for a quote.